Hi!
Das Volumen rechnet man bei vielen Körpern mit
V = Grundfläche * Höhe
aus.
Ansonsten gibt es noch die Pyramiden
V = 1/3 * Grundfläche * Höhe
und die Kugel:
4/3 * r³ * pi
So viel zu den grundsätzlichen Möglichkeiten...
LG nif7
Hi!
Das Volumen rechnet man bei vielen Körpern mit
V = Grundfläche * Höhe
aus.
Ansonsten gibt es noch die Pyramiden
V = 1/3 * Grundfläche * Höhe
und die Kugel:
4/3 * r³ * pi
So viel zu den grundsätzlichen Möglichkeiten...
LG nif7
„Wake up! “ One of Charley’s comrades went from bed to bed and wakened the soldiers. Charley opened his eyes and saw his comrades wearing their uniforms. Outside the tent he heard loud voices shouting. Quickly he got up and dressed up his own uniform. What was happening? Two minutes later he and his unit stood on a wide field in front of their camp. It was a frosty and a dark morning. An officer went up and down in front of them. “One of our scouts have seen the whole unit of the Rebels [doing what?]. They are close to our camp, and they will attack us soon. Now everybody of you takes cover. They shall think, we are still asleep.” Everybody went to his position and waited for a signal. Charley’s heard beat painfully. It was the first time the South attacked them; normally, the Union first attack the South. Suddenly there was a shot. Charley raised carefully his head. He saw the Rebels coming up to them. An officer of his unit shouted “SHOOT!” and instantly the whole union shot at the Rebels. It was a horrible battle, but soon the Rebels lost many soldiers, while the Union nearly stays complete. Charley had chosen a very good place on the battlefield, but witch a lot of rebels coming close to him, he quickly escaped and chose another position. After one hour there were just a few soldiers of the southern army left. The Rebels escaped and the Union tried to shoot as many as possible of them. Charley saw a bleeding enemy carefully escaping. He shot at him and hit the soldiers leg. The Rebel frightened looked at Charley, who realized, who lay in front of him: It was the young Rebel he met two days ago. Charley looked at him and he sank his weapon. The Rebel stood up and ran away, without looking back. But suddenly an officer behind Charley shouted “SHOOT! Why don’t you shoot?” The Rebel, who was running in front of him, ran as fast as he could, but Charley had no choice. He raised his gun; aimed, closed his eyes and shot. He heard a person dropping down in front of him. Without looking what he did, he turned around. That was his last he killed this day and even the rest of his life. It has been the last battle between North and South; the Northern Part of the USA had won.
LG nif7
Zitatzwischen 14 und 17Uhr : heftige Regenfälle und Gewitter
between 14pm and 17pm : there are heavy showers and thunderstorms
Zitat6Uhr : Sonnenaufgang, Regenwald liegt im Nebel,
6 am : sunrise, the rainforest is befogged
Zitat18Uhr : Sonnenuntergang
18pm : sundown/sunset
Zitattreefrogs
gibt's das Wort wirklich?
LG nif7
Bei den Elementen, die in einer Nebengruppe stehen, kann man die Anzahl der Valenzelektronen nicht so einfach ablesen (und man muss es auch nicht; bei denen sollte es in Aufgaben immer explizit es angegeben sein)...
Hallo!
Zitat von KrisiyGoogle war jetzt net so berauschend.
Ach ja?
http://www.abipur.de/hausaufgaben/n…/115893724.html
Oder reicht das nicht?
LG nif7
Wenn du s = v²/(2g) meinst, dann stimmt es...
P.S.: Klammern erleichtern das Leben
Zitatmassenhaft inhaltsleere Postings, die nur aus den Aufgaben bestehen.
Warum wohl? Weil auch du sie nicht (hilfreich) beantwortest, sondern dich nur darüber beklagst, dass es keiner hilft/etwas macht/antwortet!
Mir fällt spontan kein Beitrag von dir ein, der dem Hilfesuchenden auch nur den Schimmer einer Lösungsidee gebracht hätte...
Hi!
Um aus zwei Formeln eine zu machen, löse eine Gleichung nach einer Variable auf, die auch in der zweiten Gleichung vorkommt, und setze diese dann in die andere ein.
s=1/2v² würde nur stimmen, wenn die erste Gleichung s = 1/2 (g * t)² heißen würde, sie heißt aber s = 1/2 * g * t² (gt sind zwei Variablen (das ist, glaube ich, dein einziger Fehler...))
LG nif7
Hi!
Wasser ist ein Ampholyt und kann sowohl als Säure als auch als Base reagieren.
Da NH3 eine Base ist, reagiert das Wasser hier als Säure und gibt ein Proton ab.
In der zweiten Reaktion reagiert Wasser als Base (=Protonenakzeptor) und nimmt von der Salzsäure ein Proton auf.
LG nif7
Hi!
Die Edelgaskonfiguration zu haben, heißt, dass das Teilchen acht Valenzelektronen besitzt. Um diese zu erreichen, geben Metalle Elektronen ab, Nichtmetalle nehmen zusätzliche auf.
Um das festzustellen, siehst du im Periodensystem nach, in welcher Hauptgruppe der Stoff steht, den du untersuchst. Die Nummer der Hauptgruppe ist gleich der Anzahl der Valenzelektronen, die ein Atom, wenn es ungeladen ist, hat.
Wenn gilt:
Hauptgruppe - Ladung = 0 oder 8 (oder 2 in der 1. Periode)
...dann hat das Atom/Ion die Edelgaskonfiguration
Beispiel:
Cl^-1
Chlor ist in der 7. Hauptgruppe:
7 - (-1) = 8
Cl^-1 hat also die Edelgaskonfiguration
LG nif7
Hi!
lipophil heißt, dass sich ein Stoff gut in Fett löst, d.h. in unpolaren Lösungsmitteln.
lipophob ist das Gegenteil dazu.
LG nif7
Hi!
Ohne Reibung kannst du das ganze am leichtesten mit Energien rechnen:
Kinetische Energie wird in Höhenergie umgewandelt. Dadurch weißt du dann, wie hoch das Auto auf die schiefe Ebene kommt. Dann kannst du dir mit sin/cos ausrechnen, wie weit er kommt.
Andere Möglichkeit (die du auch für die Rechnung mit Reibung brauchst):
Zeichne dir ein Kräfteparallelogramm ein, berechne dir die Hangabtriebskraft, damit dann die Beschleunigung a, mit der der Körper gebremst wird.
Anschließend das a in die Bewegungsgleichungen einsetzen und dir die Strecke ausrechnen.
LG nif7
Zitat von trickfilmerdas einzige - auch wenn ich sie selber verwendet habe, so bin ich mir unsicher ob die begriffe "mechanical impact", "viscosity" und dullness geläufig sind. weißt du das?
Also ich sehe bei den Begriffen keine Probleme...
Zitat von trickfilmerund klingt das insgesamt amerikanisch?
hat es die besonderheiten/den slang des amerikanischen?
Da fragst du wohl besser einen Amerikaner...
Nachdem du jetzt q = 0,75 berechnet hast, hast du insgesamt für die Formel
G(n) = G * q^n
alles gegeben, was du brauchst um das ganze für n=6 zu berechnen...
Diesen Thread gibt es schon!
https://www.hausaufgaben-forum.net/ftopic2086.html
**closed**
Zitat von Heidi155) G = G(n) / q^n
G= 20/0,88 ^10 =71,81 ( 71,8 °C)
so richtig ?
stimmt auch!
Bei 6c)
Berechne den Abnahmefaktor mit:
G(n) = 90°C
G = 120°C
n = 1
Wenn du diesen hast, kannst du G(6h) ausrechnen...
LG nif7
Hi!
Toller Film!!
Hey Darling!
As I see, things don't work well today?
Wanna know why?
As you might know ketchup contains starch.
The long chained starch molecules get tangled up among each other.
That's why ketchup is so viscous.
Due to mechanical impact, like pounding on the botte-ground, these compounds break.
The molecules aligns with the direction of movement and the ketchup is pouring out easier.
Back to the passive state the viscosity renews.
Now it's your turn to shake, dash and pound again...
But please close the lid before!
Use the centrifugal force and take advantage of some useful tools.
Or you just wait until the ketchup is coming out by it's natural dullness himself.
Is's up to you
LG nif7
Zitat von Heidi15Für 5.) Formel: G = Gn/qn
6.) Formel : qn = Gn/ G
richtig so?
ja, das ist richtig!
5) G = G(n) / q^n
6) q^1 = q = G(n) / G
Alle Größen, die auf der rechten Seite stehen, hast du gegeben -> einsetzen -> ausrechnen